Cisco Cisco Packet Data Gateway (PDG) Release Note

Page of 678
SAEGW Changes in Release 15.0   
▀  SAEGW Enhancements for September 30, 2013 
 
 
▄  Cisco ASR 5x00 Release Change Reference 
444 
   
      end 
Notes: 
 
gtpc echo interval seconds 
must be an integer from 60 to 3600. Default: 60 
 
gtpc echo retransmission-timeout seconds 
must be an integer from 1 to 20. 
Default: 5 
 
gtpc max-retransmissions number 
must be an integer from 0 to 15. 
Default: 4 
 
gtpc retransmission-timeout seconds 
must be an integer from 1 to 20. 
Default: 5 
peer-map
 
The following new command creates a peer map and enters the Peer Map Configuration mode. This new command 
mode enables the operator to map and LTE Policy to a peer profile based on matching criteria and precedence for the 
criteria. 
configure 
   lte-policy 
      peer-map map_name [ -noconfirm ] 
      no peer-map map_name 
      end 
peer-profile
 
The following command creates a P-GW or S-GW peer profile and enters the Peer Profile Configuration mode.  
configure 
   peer-profile service-type { pgw-access | sgw-network } { default | name profile_name } 
[ -noconfirm ]
 
   no peer-profile service-type { pgw-access | sgw-network } name profile_name 
   end 
Note: 
 
A maximum of 64 peer profiles can be configured. 
precedence
 
The following new command configures the matching criteria and precedence for mapping an LTE Policy with a peer 
profile.  
configure 
   lte-policy