Cisco Cisco Packet Data Gateway (PDG) Notas De La Versión
SAEGW Changes in Release 15.0
▀ SAEGW Enhancements for September 30, 2013
▄ Cisco ASR 5x00 Release Change Reference
444
end
Notes:
gtpc echo interval seconds
must be an integer from 60 to 3600. Default: 60
gtpc echo retransmission-timeout seconds
must be an integer from 1 to 20.
Default: 5
gtpc max-retransmissions number
must be an integer from 0 to 15.
Default: 4
gtpc retransmission-timeout seconds
must be an integer from 1 to 20.
Default: 5
peer-map
The following new command creates a peer map and enters the Peer Map Configuration mode. This new command
mode enables the operator to map and LTE Policy to a peer profile based on matching criteria and precedence for the
criteria.
mode enables the operator to map and LTE Policy to a peer profile based on matching criteria and precedence for the
criteria.
configure
lte-policy
peer-map map_name [ -noconfirm ]
no peer-map map_name
end
peer-profile
The following command creates a P-GW or S-GW peer profile and enters the Peer Profile Configuration mode.
configure
peer-profile service-type { pgw-access | sgw-network } { default | name profile_name }
[ -noconfirm ]
[ -noconfirm ]
no peer-profile service-type { pgw-access | sgw-network } name profile_name
end
Note:
A maximum of 64 peer profiles can be configured.
precedence
The following new command configures the matching criteria and precedence for mapping an LTE Policy with a peer
profile.
profile.
configure
lte-policy