Cisco Cisco ASR 5000 Administrator's Guide

 

▄  Cisco ASR 5x00 Home eNodeB Gateway Administration Guide 

This section provides a high-level series of steps and the associated configuration file examples for configuring the 
system to perform as an HeNB-GW node in a test environment. Information provided in this section includes the 
following: 



 

  



 

  



 

  

The following table lists the information that is required to configure the local context on an HeNB-GW. 

 

 

Management Interface Configuration

 

Interface name

 

An identification string between 1 and 79 characters (alpha and/or numeric) by which the interface will be 
recognized by the system.

 

Multiple names are needed if multiple interfaces will be configured. 

IP address and 
subnet

 

IPv4 addresses assigned to the interface.

 

Multiple addresses and subnets are needed if multiple interfaces will be configured. 

Physical port 
number

 

The physical port to which the interface will be bound. Ports are identified by the chassis slot number 
where the line card resides followed by the number of the physical connector on the card. For example, port 
17/1 identifies connector number 1 on the card in slot 17.

 

A single physical port can facilitate multiple interfaces. 

Gateway IP address

 

Used when configuring static IP routes from the management interface(s) to a specific network.

 

Security 
administrator name

 

The name or names of the security administrator with full rights to the system.

 

Security 
administrator 
password

 

Open or encrypted passwords can be used.

 

Remote access 
type(s)

 

The type of remote access that will be used to access the system such as telnetd, sshd, and/or ftpd.

 

 

The following table lists the information that is required to configure the Source context on an HeNB-GW.