Cisco Cisco Aironet 350 Wireless LAN Client Adapter Release Notes

When a value reaches a threshold and stays there, continuous triggers are not generated. After a 
value reaches a threshold, it must become not equal to the threshold value before another trigger 
is generated.

Signal Strength

Triggers audible alerts, log file entries, or both when the Signal Strength 
value reaches or crosses over the specified threshold value. If you check 
this check box, be sure to also choose a threshold value.

Threshold Value Range: –95 to –45 dBm or 0 to 100%

Default: Unchecked; –75 dBm or 40%

The actual dBm reading could exceed the stated threshold value 
range.

The Display in percent check box on the Associated AP Status 
tab determines which threshold value units are used.

Noise Level/Signal Quality

Triggers audible alerts, log file entries, or both when the Noise Level or 
Signal Quality value reaches or crosses over the specified threshold 
value. If you check this check box, be sure to also choose a threshold 
value.

Threshold Value Range: –45 to –95 dBm or 0 to 100%

Default: Unchecked; –65 dBm or 40%

The actual dBm reading could exceed the stated threshold value 
range.

The Display in percent check box on the Associated AP Status 
tab determines which condition and threshold value units are 
used.

Signal-to-Noise Ratio/Link 
Quality

Triggers audible alerts, log file entries, or both when the Signal-to-
Noise Ratio or Link Quality value reaches or crosses over the specified 
threshold value. If you check this check box, be sure to also choose a 
threshold value.

Threshold Value Range: 0 to 50 dBm or 0 to 100%

Default: Unchecked; 20 dBm or 40%

The actual dBm reading could exceed the stated threshold value 
range.

The Display in percent check box on the Associated AP Status 
tab determines which condition and threshold value units are 
used.

Link Speed

Triggers audible alerts, log file entries, or both when the Link Speed 
value reaches or crosses over the specified threshold value. If you check 
this check box, be sure to also choose a threshold value.

Threshold Value Range: 0 to the maximum rate of the current 

connection

Default: Unchecked; 11 Mbps