Cisco Cisco WAP2000 Wireless-G Access Point - PoE Maintenance Manual
Configuring the WAP2000 Access Point
Verifying Access Point Status
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
62
6
To check local network status, follow these steps:
STEP 1
Click Status > Local Network.
The Status > Local Network window displays the status information of the access
point.
point.
•
Information
-
Hardware Version—The version of the access point’s current hardware.
-
Software Version—The version of the access point’s current software.
-
Local MAC Address—The MAC address of the access point’s LAN
interface.
interface.
-
System Up Time—The length of time the access point has been running.
•
Local Network
-
IP Address—The access point’s IP address, as it appears on your local
network.
network.
-
Subnet Mask—The access point’s subnet mask.
-
Default Gateway—The access point’s default gateway information.
-
Primary DNS—The access point’s primary DNS information.
-
Secondary DNS—The access point’s secondary DNS information.
STEP 2
To update the status information, click Refresh.