Cisco Cisco WAP2000 Wireless-G Access Point - PoE Maintenance Manual
Configuring the WAP2000 Access Point
Verifying Access Point Status
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
63
6
Checking Wireless Status
The Status > Wireless window displays the access point’s current status
information for the wireless networks.
information for the wireless networks.
To check the wireless network status of the access point, follow these steps:
STEP 1
Click Status > Wireless.
This page displays the status of the wireless network:
•
MAC Address—The MAC address of the access point’s wireless interface.
•
Mode—The access point’s wireless network mode.
•
Channel—The access point’s channel setting for the SSID.
•
Bandwidth Utilization—The percentage of the bandwidth being used.
•
VLAN Trunk—The VLAN Trunk status.
•
Priority Setting—The priority setting status.
•
SSID 1–4—Information about the access point’s configured SSIDs.