Cisco Cisco WAP2000 Wireless-G Access Point - PoE Release Notes

2

Release Notes for Cisco WAP2000 Wireless-G Access Point with PoE Firmware Version 2.0.6.0

When configuring this device, be aware that the default IP settings changed from 
static IP to DHCP in firmware version 2.0.3.4 and later releases.

Performing a factory reset via the GUI may take an extended time to complete 
depending on your configuration.

For a workaround, if the reset does not complete after 5 mins, perform a hard reset 
by pushing the reset button on the back of the unit as described in the user 
docmentation.

The following problems were fixed in firmware version 2.0.6.0:

•

GUI—RADIUS Server port no longer accepts various illegal values for the 
port range.

•

GUI—RADIUS Server IP address no longer accepts leading zeros.

•

GUI—DHCP Auto Configuration process has been optimized.

When enabling or disabling multiple VLAN IDs, the GUI cannot be redirected as 
usual. This has been tested with IE6, IE7, and Mozilla Firefox.

The following problems were fixed in firmware version 2.0.5.0: