Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Maintenance Manual

Using the Access Point Setup Wizard

Cisco WAP571/E Administration Guide

12

You should assign a different VLAN ID from the default (1) to wireless traffic, in 
order to segregate it from management traffic on VLAN 1.

Click Next. 

For the WAP571/E device, the Network Name, Wireless Security, and VLAN ID 
pages show to enable configuring Radio 2. When finished with configuring Radio 
2, click Next.

The Wizard displays the Enable Captive Portal - Create Your Guest Network 
window.

Select whether or not to set up an authentication method for guests on your 
network, and click Next.

If you click No, skip to 

.

If you click Yes, the Wizard displays the Enable Captive Portal - Name Your Guest 
Network window.

Specify a Guest Network Name for Radio 1. For the WAP571/E device, select 
whether the guest network uses Radio 1 or Radio 2.

Click Next. The Wizard displays the Enable Captive Portal - Secure Your Guest 
Network window.

Choose a security encryption type for the guest network and enter a security key. 
For a description of these options, see 

.

Click Next. The Wizard displays the Enable Captive Portal - Assign the VLAN ID 
window.

Specify a VLAN ID for the guest network. The guest network VLAN ID should be 
different from the management VLAN ID.

Click Next. The Wizard displays the Enable Captive Portal - Enable Redirect URL 
window.

Select Enable Redirect URL and specify a fully-qualified domain name or IP 
address in the Redirect URL field (including http://). If specified, guest network 
users are redirected to the specified URL after authenticating.

Click Next. The Wizard displays the Summary - Confirm Your Settings window.

Review the settings that you configured. Click Back to reconfigure one or more 
settings. If you click Cancel, all settings are returned to the previous or default 
values.