Cisco Cisco Catalyst Blade Switch 3020 for HP
2
Cisco Software Activation Document for HP
OL-12769-01
Software Activation
This section has this information:
•
•
•
•
•
To register your software license by using the PAK, go to
Note
To connect your management station or PC to the Cisco Product License Registration Portal, use a file
transfer protocol such as the Xmodem Protocol or TFTP.
transfer protocol such as the Xmodem Protocol or TFTP.
If you are connecting your PC to the Cisco License Manager server, you do not need to use one of these
protocols.
protocols.
Feature Sets
The switch supports these feature sets:
•
IP base
•
IP services
•
Advanced IP service
The software licenses are not affected by Cisco IOS software upgrades.
has information about the feature sets supported on the switch.
Understanding Software Licenses
A software license applies only to a specific feature set. A switch can have more than one software
license, but you can enable only one license at a time.
license, but you can enable only one license at a time.
Table 1
Supported Feature Combinations
Feature Combination
Feature Set on the Switch
Layer 2+, basic Layer 3 routing
IP base, noncryptographic
Layer 2+ and basic Layer 3 routing, Kerberos, SSH
1
, and
SSL
2
1.
SSH = Secure Shell
2.
SSL = Secure Socket Layer
IP base, cryptographic
Layer 2+ and full Layer 3 routing
IP services, noncryptographic
Layer 2+ and full Layer 3 routing, Kerberos, SSH, and SSL IP services, cryptographic
Layer 2+, Layer 3 routing, unicast routing of IPv6
3
packets,
Kerberos, SSH, and SSL
3.
IPv6 = IP Version 6
Advanced IP services, cryptographic