Cisco Cisco Catalyst Blade Switch 3120 for HP
2
Cisco Software Activation Document for HP
OL-12767-01
Software Activation
Software Activation
The switch runs the universal software image that has the Cisco IOS code for multiple feature sets. To
enable a specific feature set, you must use the software activation feature to install the software license
for that feature set. With software activation, you can
enable a specific feature set, you must use the software activation feature to install the software license
for that feature set. With software activation, you can
•
Generate a software license.
•
Install the software license on your switch.
•
Enable a feature set.
•
Upgrade a feature set.
Beginning with Cisco IOS Release 12.2(46)SE, the switches support these features:
•
Temporary software licenses
•
Rehosting a software license
•
Cisco License Call Home
This section has this information:
•
•
•
•
•
Note
To connect your management station or PC to the Cisco Product License Registration Portal, use a file
transfer protocol such as the Xmodem Protocol or TFTP.
transfer protocol such as the Xmodem Protocol or TFTP.
If you are connecting your PC to the Cisco License Manager server, you do not need to use one of these
protocols.
protocols.
Feature Sets
The switch supports these feature sets:
•
IP base
•
IP services
The software licenses are not affected by Cisco IOS software upgrades.
The switch supports the feature sets in
Table 1
Supported Feature Combinations
Feature Combination
Feature Set on the Switch
Layer 2+, basic Layer 3 routing
IP base, noncryptographic
Layer 2+ and basic Layer 3 routing, Kerberos, SSH
1
, and
SSL
2
IP base, cryptographic