Cisco Cisco Prime IP Express 8.3 Technical References
Cisco Prime
IP Express CLI Reference Guide
CLI Codes and Formats
Status Returns
The nrcmd program returns status information on the first line of information written to the standard output stream. If there is
more data, nrcmd displays this information on additional lines.
more data, nrcmd displays this information on additional lines.
The first line consists of a numeric status that is followed by a human-readable error status.
The status codes are all three-digit integer decimal numbers. The range 100 through 599 is grouped as in Table 4-1.
Table 4-1. Status Codes
Value
Description
100-199
Normal return
200-299
Informational (warning)
300-499
Error
500-599
Fatal Error
For anything other than an error, Network Registrar assumes that the requested operation was completed; however, some
warning messages signal a condition that must be corrected. Unless a fatal error occurs, the command line interface will keep
running in interactive mode. Fatal errors imply that something serious happened and that you must restart the Network Registrar
command line processor.
warning messages signal a condition that must be corrected. Unless a fatal error occurs, the command line interface will keep
running in interactive mode. Fatal errors imply that something serious happened and that you must restart the Network Registrar
command line processor.
Network Registrar Error Codes
Table 4-2
lists and describes the Network Registrar error codes.
Table 4-2. Error Codes
Number
Description