Cisco Cisco Prime IP Express Jumstart 8.3 Installation Guide
3
Cisco Prime IP Express Jumpstart 8.3 Quick Start Guide
Prerequisites
This guide contains the following sections:
Prerequisites
The items concerning the networking environment are as follows. These are not unique to the virtual appliance, but are
instead values that are determined by the environment in which you will deploy the virtual appliance:
instead values that are determined by the environment in which you will deploy the virtual appliance:
The IP address or DNS name of the ESXi installation on which you intend to deploy the virtual appliance.
The IP address or DNS name of any vCenter server associated with the ESXi installation, above.
Netmask associated with the IP address for the virtual appliance.
Gateway address appropriate to the IP address and netmask.
IP addresses of up to two DNS servers for the virtual appliance to use.
Any proxy values necessary for the virtual appliance to access the Internet.
Note:
Ensure that you have the Cisco Prime IP Express licenses from Cisco.com before you get started. For details, see
the License Files section of Cisco Prime IP Express 8.3 Installation Guide.
Cisco Prime IP Express Jumpstart
Be ready with the following information when configuring the Cisco Prime IP Express Jumpstart:
IP address for the CIMC port on the Cisco Prime IP Express Jumpstart.
Note:
This IP address must be unique for this appliance.
Netmask (subnetmask) for the CIMC port address.
Gateway for the CIMC port address.
Network information for ESXi
Be ready with the following information when configuring network information for ESXi:
IP address for the ESXi installation on the Cisco Prime IP Express Jumpstart.
Note:
This IP address must be unique for this appliance.
Netmask for the IP address for the ESXi installation.
Gateway address for the ESXi installation on the Cisco Prime IP Express Jumpstart.
VLAN (if any) for the ESXi installation on the Cisco Prime IP Express Jumpstart.