Cisco Cisco ONS 15454 M2 Multiservice Transport Platform (MSTP) Technical References
11
OL-30833-01
CTC Default Settings
The following types of defaults are defined for DWDM, TXP, MXP, and Ethernet cards.
ETSI Configuration Defaults
Most card and port-level configuration defaults correspond to settings found in the CTC card-level
Provisioning tabs.
Provisioning tabs.
Note
The full set of Automatic Laser Shutdown (ALS) configuration defaults can be found in the CTC
card-level Maintenance > ALS tab for supported cards. ALS defaults are supported for OSCM,
OSC-CSM, OPT-BST, OPT-BST-L, GE_XP, 10GE_XP, TXP,
card-level Maintenance > ALS tab for supported cards. ALS defaults are supported for OSCM,
OSC-CSM, OPT-BST, OPT-BST-L, GE_XP, 10GE_XP, TXP,
and MXP cards. For information on how
ALS card settings achieve network level optical safety, see the chapters “Setup Optical Service Channel
Cards”, “Optical Amplifier Cards”, or “Provision Transponder and Muxponder Cards” in the Line Card
Configuration guide.
Cards”, “Optical Amplifier Cards”, or “Provision Transponder and Muxponder Cards” in the Line Card
Configuration guide.
Configuration defaults that are reachable from the CTC card-level Provisioning tabs (except as noted)
include the following types of options (arranged by CTC subtab):
include the following types of options (arranged by CTC subtab):
•
Line—(GE_XP, 10GE_XP, TXP and MXP cards) Line-level configuration settings, including
SONET, Wavelength Trunk, Trunk, Client, Distance Extension, and Enhanced FC/FICON ISL
settings.
SONET, Wavelength Trunk, Trunk, Client, Distance Extension, and Enhanced FC/FICON ISL
settings.
Note
Some line configuration tabs, including Client, Distance Extension, and Enhanced FC/FICON
ISL settings tabs, only appear in the card-level Provisioning > Line tab after a pluggable port
module (PPM) is provisioned to a fibre channel payload type (port rate) for the particular card.
ISL settings tabs, only appear in the card-level Provisioning > Line tab after a pluggable port
module (PPM) is provisioned to a fibre channel payload type (port rate) for the particular card.
•
OTN—(GE_XP, 10GE_XP, MXP-2.5G-10E, MXP-2_5G-10G, MXP-MR-10DME, TXP-MR-10E,
TXP-MR-10G, TXP-MR-2.5G, and TXPP-MR-2.5G cards) Optical transport network (OTN) line
configuration settings.
TXP-MR-10G, TXP-MR-2.5G, and TXPP-MR-2.5G cards) Optical transport network (OTN) line
configuration settings.
•
Card—(See listed settings for applicable cards)
–
Card mode—MXPP-MR-2.5G and MXP-MR-2.5G (ESCON, FC_GE, or MIXED), GE_XP
(20GE MXP, 10GE MXP, or L2 over DWDM), and 10GE_XP (10GE TXP or L2 over DWDM)
(20GE MXP, 10GE MXP, or L2 over DWDM), and 10GE_XP (10GE TXP or L2 over DWDM)
–
Port range-level mode settings—MXP-MR-10DME cards only
–
Termination mode—TXP-MR-10E, MXP-2.5G-10E, MXP-2.5G-10G, TXPP_MR_2.5G,
TXP_MR_10G, and TXP_MR_2.5G cards
TXP_MR_10G, and TXP_MR_2.5G cards
–
AIS squelch settings—TXP-MR-10E and MXP-2.5G-10E cards
•
ALS (card-level Maintenance > ALS tab)—(OSC-CSM, OSCM, OPT-BST, OPT-BST-L, GE_XP,
10GE_XP, TXP, and MXP cards) ALS configuration defaults.
10GE_XP, TXP, and MXP cards) ALS configuration defaults.
Note
For further information about supported features on each card, see the chapters “Setup Optical Service
Channel Cards”, “Optical Amplifier Cards”, or “Provision Transponder and Muxponder Cards” in the
Line Card Configuration guide.
Channel Cards”, “Optical Amplifier Cards”, or “Provision Transponder and Muxponder Cards” in the
Line Card Configuration guide.
ETSI Threshold Defaults
Threshold default settings define the default cumulative values (thresholds) beyond which a threshold
crossing alert (TCA) will be raised, making it possible to monitor the network and detect errors early.
crossing alert (TCA) will be raised, making it possible to monitor the network and detect errors early.