Cisco Cisco ONS 15454 M2 Multiservice Transport Platform (MSTP) Technical References
3
OL-30833-01
Network Element Defaults Description
Configuration defaults that are reachable from the CTC card-level Provisioning tabs (except as noted)
include the following types of options (arranged by CTC subtab):
include the following types of options (arranged by CTC subtab):
•
Line—(ADM-10G, GE_XP, 10GE_XP, TXP and MXP cards) Line-level configuration settings,
including SONET, Wavelength Trunk, Trunk, Client, Distance Extension, and Enhanced FC/FICON
ISL settings.
including SONET, Wavelength Trunk, Trunk, Client, Distance Extension, and Enhanced FC/FICON
ISL settings.
Note
Some line configuration tabs, including Client, Distance Extension, and Enhanced FC/FICON
ISL settings tabs, only appear in the card-level Provisioning > Line tab after a pluggable port
module (PPM) is provisioned to a fibre channel payload type (port rate) for the particular card.
ISL settings tabs, only appear in the card-level Provisioning > Line tab after a pluggable port
module (PPM) is provisioned to a fibre channel payload type (port rate) for the particular card.
•
OTN—(ADM-10G, GE_XP, 10GE_XP, MXP-2.5G-10E, MXP-2_5G-10G, MXP-MR-10DME,
TXP-MR-10E, TXP-MR-10G, TXP-MR-2.5G, and TXPP-MR-2.5G cards) Optical transport
network (OTN) line configuration settings.
TXP-MR-10E, TXP-MR-10G, TXP-MR-2.5G, and TXPP-MR-2.5G cards) Optical transport
network (OTN) line configuration settings.
•
Card—(See listed settings for applicable cards)
–
Card mode—MXPP-MR-2.5G and MXP-MR-2.5G (ESCON, FC_GE, or MIXED), GE_XP
(20GE MXP, 10GE MXP, or L2 over DWDM), and 10GE_XP (10GE TXP or L2 over DWDM)
(20GE MXP, 10GE MXP, or L2 over DWDM), and 10GE_XP (10GE TXP or L2 over DWDM)
–
Port range-level mode settings—MXP-MR-10DME cards only
–
Termination mode—TXP-MR-10E, MXP-2.5G-10E, MXP-2.5G-10G, TXPP_MR_2.5G,
TXP_MR_10G, and TXP_MR_2.5G cards
TXP_MR_10G, and TXP_MR_2.5G cards
–
AIS squelch settings—TXP-MR-10E and MXP-2.5G-10E cards
•
ALS (card-level Maintenance > ALS tab)—(OSC-CSM, OSCM, OPT-BST, OPT-BST-L,
ADM-10G, GE_XP, 10GE_XP, TXP, MXP, and PSM cards) ALS configuration defaults.
ADM-10G, GE_XP, 10GE_XP, TXP, MXP, and PSM cards) ALS configuration defaults.
Note
For further information about supported features on each card, see the chapters “Setup Optical Service
Channel Cards”, “Optical Amplifier Cards”, or “Provision Transponder and Muxponder Cards” in the
Line Card Configuration guide.
Channel Cards”, “Optical Amplifier Cards”, or “Provision Transponder and Muxponder Cards” in the
Line Card Configuration guide.
ANSI Threshold Defaults
Threshold default settings define the default cumulative values (thresholds) beyond which a threshold
crossing alert (TCA) will be raised, making it possible to monitor the network and detect errors early.
crossing alert (TCA) will be raised, making it possible to monitor the network and detect errors early.
Card threshold default settings are provided as follows:
•
PM thresholds—(OSCM, OSC-CSM, OTU2-XP, TXP, and MXP cards) Expressed in counts or
seconds; includes line and SONET thresholds.
seconds; includes line and SONET thresholds.
•
Optical thresholds—(ADM-10G, GE_XP, 10GE_XP, OTU2-XP, TXP, and MXP cards) Expressed
in percentages or dBm; includes client and trunk optical thresholds.
in percentages or dBm; includes client and trunk optical thresholds.
•
OTN FEC thresholds (ADM-10G, GE_XP, 10GE_XP, TXP, and MXP cards)—Expressed in counts;
includes enhanced, standard, 1G Ethernet, 1G Fibre channel, 1G FICON, OC-3, OC-12, OC-48, 2G
FICON, and 2G Fibre channel thresholds.
includes enhanced, standard, 1G Ethernet, 1G Fibre channel, 1G FICON, OC-3, OC-12, OC-48, 2G
FICON, and 2G Fibre channel thresholds.
•
OTN G.709 thresholds (ADM-10G, GE_XP, 10GE_XP, TXP, and MXP cards)—Expressed in counts
or seconds; includes ITU-T G.709 PM and SM thresholds.
or seconds; includes ITU-T G.709 PM and SM thresholds.