Cisco Cisco Broadband Access Center Telco Wireless 3.8
5-24
Cisco Broadband Access Center for Cable Administrator’s Guide
OL-2445-02
Chapter 5 Configuring Broadband Access Center for Cable
Managing External Files
Note
If you do not know the exact name or location of the source file, use the Browse function to
navigate to the desired directory and select the file.
navigate to the desired directory and select the file.
Step 5
Click Submit. After submitting the replacement file, a confirmation page appears to indicate that the
replacement was performed successfully.
replacement was performed successfully.
Note
All devices using this file through a class of service are regenerated once the replacement is
finished.
finished.
Figure 5-20 Replace External Files Page
identifies the fields and buttons shown in
.
Exporting External Files
You can copy an external files to your local hard drive using the export function. Doing so while using
the Internet Explorer browser is somewhat different from using a Netscape browser. This procedure
assumes that you are using Internet Explorer and differences that occur with Netscape are identified.
the Internet Explorer browser is somewhat different from using a Netscape browser. This procedure
assumes that you are using Internet Explorer and differences that occur with Netscape are identified.
To export a file:
Step 1
Choose Configuration on the Primary Navigation bar.
Table 5-14 Replace External Files Page
Field or Button
Description
External File Name
Identifies the file to be replaced.
Source File Name
Identifies the filename and pathname, of the source file to be used.
Browse
Lets you navigate through the computer to locate the desired source file.
Submit
Activates or implements changes that you have made.
Reset
Returns all settings back to their previous setting.