Cisco Cisco Broadband Access Center Telco Wireless 3.8

Configures the syslog subsystem to send messages remotely and not log them locally. The remote system 
must be configured with the syslog log-server command.

This is an example of how to use the syslog mode command:

dpe# syslog mode remote

%OK (Requires appliance restart "> reload")

This section describes the commands that affect the PacketCable (voice technology) features found in 
the DPE. These commands include:

 

 

Prior to using any debug command, you must ensure that DPE debugging is enabled. Run the debug on 
command to enable this function.