Cisco Cisco Broadband Access Center for Cable 4.1
C-15
Cisco Broadband Access Center for Cable Administrator’s Guide
OL-2445-02
Appendix C Device Provisioning Engine Command Line Interface
System Commands
show cpu
Usage Guidelines
This command identifies CPU usage for BAC activities that are currently running.
Examples
This is an example of how to use the show cpu command:
dpe# show cpu
avg-cpu:
%user
%nice
%sys
%idle
0.00 0.00
0.00
100.00
show disk
Usage Guidelines
This command identifies how much of the current disk the DPE is using.
Examples
This is an example of how to use the show disk command:
dpe# show disk
show hostname
Usage Guidelines
This command shows the DPEs host name.
Examples
This is an example of how to use the show hostname command:
dpe# show hostname
hostname = BPR_host
show interface ethernet <0...1> config
Usage Guidelines
This command shows the configuration for the Ethernet interface. These are the settings that the DPE
uses when it reboots. Use the show interface ethernet <0...1> stats command to identify the currently
configured IP address.
uses when it reboots. Use the show interface ethernet <0...1> stats command to identify the currently
configured IP address.
Filesystem
Size
Used
Avail
Use%
Mounted on
/dev/sda1
/dev/sda5
1.9G
14M
198M
57M
1.6G
13M
11%
1%
/
/opt