Cisco Cisco Broadband Access Center for Cable 4.1
5-16
Cisco Broadband Access Center for Cable Administrator’s Guide
OL-2445-02
Chapter 5 Configuring Broadband Access Center for Cable
Configuring Defaults
System Defaults
When you select the Systems Defaults link, the System Defaults page (see
) appears.
Figure 5-12 System Defaults Page
Note
The default values can also be changed using the BAC application program interface.
identifies the fields and buttons that are unique to this defaults page.
Gateway (xGCP) Control Protocol Defaults
XGCP is a gateway control protocol that lets external call agents control gateways in a Voice over IP
(VoIP) environment. The Configure XGCP Defaults page (
(VoIP) environment. The Configure XGCP Defaults page (
) displays a list of default values
currently applied to the computers supported by BAC.
Table 5-10
Configure Network Registrar Defaults Page
Field or Button
Description
SNMP Write
Community String
Community String
Identifies the default write community string for any device that may require
SNMP information. The default write community string is private.
SNMP information. The default write community string is private.
SNMP Read Community
String
String
Identifies the default read community string for any device that can read or
access the SNMP MIB. The default read community string is public.
access the SNMP MIB. The default read community string is public.
Promiscuous Mode
Identifies whether or not the Promiscuous mode is enabled. There are two
selections:
selections:
•
Enable—Enables the Promiscuous mode within the RDU.
•
Disable—Disables the Promiscuous mode within the RDU.