Cisco Cisco Broadband Access Center for Cable 5.0
C-2
Cisco Broadband Access Center for Cable Administrator’s Guide
OL-2445-02
Appendix C Device Provisioning Engine Command Line Interface
System Commands
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
clock set
Usage Guidelines
This command sets the current time, using the 24-hour format, and date used by the DPE. The new time
takes effect immediately. The DPE uses GMT to keep time. When setting the time you must use GMT
to prevent the incorrect time from being returned by the time server.
takes effect immediately. The DPE uses GMT to keep time. When setting the time you must use GMT
to prevent the incorrect time from being returned by the time server.
Note
You do not have to use this command if the network time protocol (NTP) is being used. See the
for additional information.
Syntax Description
When entering the clock set command, you must use this syntax: