Cisco Cisco Broadband Access Center for Cable 5.0
C-26
Cisco Broadband Access Center for Cable Administrator’s Guide
OL-2445-02
Appendix C Device Provisioning Engine Command Line Interface
DPE Configuration Commands
clear cache
Usage Guidelines
This command erases the entire DPE cache and resets the server back to a clean state. When the DPE is
restarted, it will connect to the RDU and rebuild the cache from the information stored in the RDU’s
database. You should only clear the cache when the DPE encounters a major problem. Running this
command forces the DPE to rebuild or repopulate its device cache. This process may take an extended
amount of time to complete.
restarted, it will connect to the RDU and rebuild the cache from the information stored in the RDU’s
database. You should only clear the cache when the DPE encounters a major problem. Running this
command forces the DPE to rebuild or repopulate its device cache. This process may take an extended
amount of time to complete.
Examples
This is an example of how to use the clear cache command:
Example 1
dpe# clear cache
Clearing DPE cache...
+ 417792 bytes cleared.
Results:
These results occur when the cache is successfully cleared.
Example 2
dpe# clear cache
DPE must be stopped before clearing cache.
Results:
These results occur when the cache has not yet been stopped.
Example 3
dpe# clear cache
Clearing DPE cache...
+ Cache already cleared.
Results:
These results occur when cache has already been cleared.
dpe port
Usage Guidelines
This command sets the port number that the DPE will use to communicate with the Network Registrar
extension points. Normally, you can leave this port number intact unless there is a need to change it for
firewall reasons.
extension points. Normally, you can leave this port number intact unless there is a need to change it for
firewall reasons.
Note
The changes you introduce through this command do not take effect until you restart the DPE.