Cisco Cisco Broadband Access Center for Cable 5.0
C-38
Cisco Broadband Access Center for Cable Administrator’s Guide
OL-2445-02
Appendix C Device Provisioning Engine Command Line Interface
Log System Management Commands
debug dpe tftp
Usage Guidelines
This command enables the debugging of TFTP transfers.
Examples
This command requires no special syntax, and you enter it as shown in this example:
dpe# debug dpe tftp
%OK
debug on
Usage Guidelines
This command enables the debug logging which can be helpful when troubleshooting possible system
problems. Additionally, specific debugging categories must be enabled separately with commands like
debug dpe cache.
problems. Additionally, specific debugging categories must be enabled separately with commands like
debug dpe cache.
Examples
This command requires no special syntax, and you enter it as shown in this example:
dpe# debug on
%OK
Caution
Enabling debug logging may have a server impact on DPE performance. The DPE should never be left
running, with debug turned on, for long periods of time.
running, with debug turned on, for long periods of time.
log level
Usage Guidelines
This command lets you set the logging level that will be saved. There are seven different logging levels
that can be set. These include:
that can be set. These include:
•
log level 0-emergency—Sets the logging service to save all urgent messages.
•
log level 1-alert—Sets the logging service to save all activities that need immediate action and those
of a more severe nature.
of a more severe nature.
•
log level 2-critical—Sets the logging service to save all unusual conditions and those of a more
severe nature.
severe nature.
•
log level 3-error—Sets the logging service to save all error messages and those of a more severe
nature.
nature.
•
log level 4-warning—Sets the logging service to save all emergency messages and those of a more
severe nature.
severe nature.
•
log level 5-notification—Sets the logging service to save all notification messages and those of a
more severe nature.
more severe nature.
•
log level 6-info—Sets the logging service to save all logging messages available.