Cisco Cisco Transport Manager 9.1 Technical References
14
Cisco Transport Manager Release 9.1 ML Provisioning Methodology
OL-19365-01
IEEE 802.17 RPR Base Card Configuration
Creating or Modifying a Port Channel Member
interface { FastEthernetN | GigabitEthernetM }
[N=0 to 11, and M=0,1]
no ip address
no mtu
no shutdown
channel-group <channel_ID> { mode [active | passive] }
lacp port-priority <port_priority>
[The range is from 1 to 65535]
Deleting a Port Channel Member
interface { FastEthernetN | GigabitEthernetM }
[N=0 to 11, and M=0,1]
no channel-group <channel_ID>
no lacp port-priority
shutdown
IEEE 802.17 RPR Base Card Configuration
The base card configuration is a set of commands you enter when creating the Layer 2 topology. Use the
Create Layer 2 Topology wizard > Layer 2 Topology Bandwidth pane to define parameters for IEEE
802.17 RPR provisioning (see
Create Layer 2 Topology wizard > Layer 2 Topology Bandwidth pane to define parameters for IEEE
802.17 RPR provisioning (see
).
Figure 4
Create Layer 2 Topology Wizard—IEEE 802.17 RPR Topology Creation