Cisco Cisco Prime Network 4.0 Installation Guide
vi
Cisco Prime Network 4.0 Third-Party VNE Device Package Installation Guide
OL-30311-01
Cisco Prime Network 4.0 Third-Party VNE Device Package Installation Guide
Obtaining Prime Network Third-Party VNE Drivers
Obtaining Prime Network Third-Party VNE Drivers
To obtain the PrimeNetwork-4.0-ThirdParty-DP1308.tar for installation, contact a Cisco representative
or download it from
or download it from
Note
You can also download the Prime Network 4.0 DP tar file from the
The Independent VNE driver tar file has several Jar files within a jars folder. The Jar files use the
following naming conventions:
following naming conventions:
Vendor-JarType-VNEJarVersion.jar
JarType can be Commons, Modules, or single or multiple device specific files.
For example:
•
Juniper-Modules-v5.0.0.0.jar
•
Juniper-Junos-v5.0.0.0.jar
Installing Prime Network 4.0 Third-Party Device Package
To install a Device Package (DP), follow these steps:
Installation Prerequisites
Before you begin the installation, ensure that:
•
PrimeNetwork-4.0-ThirdParty-DP1308.tar is downloaded from Cisco.com.
•
Download the tar file from the
.
Log
into Cisco.com and navigate to Cisco Prime Network 4.0> Prime Network VNE Drivers for Non
Cisco Devices.
Cisco Devices.
•
You uncheck the critical flag from the Prime Network gateway resource in the VERITAS Cluster
Manager Application, if the HA/DR solution is in place.
Manager Application, if the HA/DR solution is in place.
•
If you are using the HA/DR in VERITAS solution
–
Uncheck the critical flag from the Cisco Prime Network gateway resource in the VERITAS
Cluster Manager application.
Cluster Manager application.
–
Via the VERITAS Cluster Manager, bring Prime Network offline
Step
Description
Described in
1
Make sure your system meets the
prerequisites.
prerequisites.
2
Copy the downloaded DP file to the proper
location.
location.
3
Install the downloaded DP file.
4
Verify the DP installation.