Cisco Cisco Prime Optical 9.8 Developer's Guide
Cisco Prime Optical 9.8 GateWay/CORBA Programmer Reference Guide
OL-29218-01
199
If the equipment is unprovisioned successfully, Prime Optical generates a state change event on
the holder state change and an object deletion event for the equipment, and pushes them to
the event channel.
the holder state change and an object deletion event for the equipment, and pushes them to
the event channel.
The ONS 15454 reserves slots 7 and 11 for TCC. One of these slots has an in-service TCC card. If
the NMS invokes unprovisionEquipment on this equipment, Prime Optical throws the
EXCPT_UNABLE_TO_COMPLY exception.
the NMS invokes unprovisionEquipment on this equipment, Prime Optical throws the
EXCPT_UNABLE_TO_COMPLY exception.
Parameters
Name
Type
Input/Output
Description
equipmentName
globaldefs::NamingAttributes_T
In
Name of the
equipment to
unprovision.
equipment to
unprovision.
This interface is not applicable for configuring payloads for client ports in TXP_MR_10G.
Throws
Compliance
TMF-defined.
3.7 maintenanceOps::MaintenanceMgr_I
MaintenanceMgr_I is used as a handle to gain access to the maintenance operation. A handle
to an instance of this interface is gained through the getManager operation in emsSession.
to an instance of this interface is gained through the getManager operation in emsSession.
This interface also implements the getCapabilities method. Operations described in the
following subsections are returned to the NMS when it invokes getCapabilities.
following subsections are returned to the NMS when it invokes getCapabilities.
3.7.1 getActiveMaintenanceOperations
Synopsis