Cisco CiscoWork QoS Policy Manager 4.1.2 User Guide
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
5-15
User Guide for QoS Policy Manager 3.0
78-12542-01
Chapter 5 Configuring QoS for IP Telephony
Configuring QoS Using the IP Telephony Wizard
Selecting the CallManager and Gateways Ready Ports
This step of the wizard describes the QoS requirements for Catalyst ports to which
CallManagers or Voice Gateways are connected, and asks you to select the switch
ports on which the wizard will configure the QoS settings for these connections
in your network (network point 3 in
CallManagers or Voice Gateways are connected, and asks you to select the switch
ports on which the wizard will configure the QoS settings for these connections
in your network (network point 3 in
Procedure
Step 1
Select the switch port on which to configure QoS for the CallManager connection
in the network, by selecting the check box next to the appropriate Ethernet port in
the selection table.
in the network, by selecting the check box next to the appropriate Ethernet port in
the selection table.
For information about the columns in this table, see
Step 2
To remove any ports that were previously assigned for this voice role:
a.
Click the Remove button in the Advanced section of the page. A page
appears, displaying the network elements assigned for the CallManager voice
role.
appears, displaying the network elements assigned for the CallManager voice
role.
For more information about this page, see
.
b.
Select the ports you want to unassign and click Remove. The page closes.
Step 3
Click Next.
•
If the Display Configuration Info. check box is selected, the Configuration
Info page appears. After reviewing the assignments summary, click Next.
Info page appears. After reviewing the assignments summary, click Next.
The voice policy groups and your CallManager ports assignments will be saved,
and the next configuration step of the wizard appears (
and the next configuration step of the wizard appears (
).
Related Topics
•
•
•