Cisco CiscoWork QoS Policy Manager 4.1.2 User Guide
Chapter 6 Working with Policy Groups and Policies
Working with Policy Groups
6-12
User Guide for QoS Policy Manager 3.0
78-12542-01
Defining Mappings
The following mappings can be configured for a policy group or policy group
template (depending on the device constraints):
template (depending on the device constraints):
•
NBAR port mappings
•
DSCP to markdown and excess markdown tables
•
DSCP mapping tables
Procedure
Step 1
Open the QoS Properties page in one of the following ways:
•
After you finish the Policy Group Definition wizard, click Finish.
•
In the Policy Groups page, or in the Policy Group Templates page, click the
number in the QoS Properties column for the required policy group.
number in the QoS Properties column for the required policy group.
•
In the Policy Group TOC, or in the Policy Group Template TOC, select QoS
Properties.
Properties.
The available mappings are displayed in the Mappings table.
Step 2
To configure mappings, or to change the mapping settings, click Edit by a
mapping. The corresponding Mappings page appears.
mapping. The corresponding Mappings page appears.
If the mapping has been configured, the current mapping settings are displayed.
If the mapping has not been configured, default mapping values are displayed.
See the following topics for more information about these pages:
•
•
•
•
•
•
Step 3
To save the displayed default mappings, click Save Defaults. If the default
mappings are not displayed, click Reset, then click Save Defaults.
mappings are not displayed, click Reset, then click Save Defaults.
Step 4
To configure or change a mapping, click Create (NBAR Port Mappings only), or
select a mapping and click Edit. The corresponding Mapping dialog box opens.
select a mapping and click Edit. The corresponding Mapping dialog box opens.