Cisco CiscoWork QoS Policy Manager 4.1.2 User Guide
F-13
User Guide for QoS Policy Manager 3.0
78-12542-01
Appendix F CLI Command Reference for QPM Actions
NBAR Port Map Configuration
NBAR Port Map Configuration
When you enable NBAR port mapping, QPM uses this command sequence to
configure the device:
configure the device:
•
ip nbar port-map protocol {tcp | udp} portnumbers
RSVP Configuration
When you enable resource reservation protocol (RSVP), QPM uses this command
sequence to configure the device:
sequence to configure the device:
1.
ip rsvp bandwidth [interface-kbps [single-flow-kbps]]
2.
ip rsvp udp-multicast
IP RTP Priority Configuration
When you enable IP RTP priority, QPM uses this command sequence to configure
the device:
the device:
•
ip rtp priority start-port port-range bandwidth
CRTP Configuration
When you enable CRTP (RTP header compression), QPM uses this command
sequence to configure the device:
sequence to configure the device:
1.
interface interfacename
2.
ip rtp header-compression [passive]
If the interface is Frame Relay, QPM uses this command sequence to configure
the device:
the device:
•
frame-relay ip rtp header-compression [passive]