Cisco Cisco Prime Optical 10.3 Installation Guide
21
Configuring a SOCKS Server
To configure a SOCKS v5 proxy server address and port value to manage connectivity through network firewalls:
Step 1
From the Home page, choose Administration > SOCKS Table.
Step 2
Click Add Row, and then enter the hostname or IP address and the TCP port number for the SOCKS host.
Step 3
Click Save.
Step 4
Click the radio button next to the row with the SOCKS server settings you want to use the next time you log in, and
click Save as Default. (Each user must select a default SOCKS server.)
click Save as Default. (Each user must select a default SOCKS server.)
Getting Started with Prime Optical
These procedures will get you started quickly with using Prime Optical. These procedures are high-level and do not include field
descriptions.
descriptions.
lists high-level tasks and the related topic in the Cisco Prime Optical 10.3 user guide where you can find more
information.
Table 22
Tasks for Getting Started Using Prime Optical
No.
High-Level Task
For More Information, See...
1.
Log in as SysAdmin to create a SuperUser account.
1
1.
If WSE cards are provisioned, in addition to creating a SuperUser account, you must create a Security Admin account. See the
in the
user guide for more information.
2.
Log in as SuperUser to configure the server NE user and
password from the Control Panel.
password from the Control Panel.
•
If there are only ONS 15454 NEs or NCS2000 NEs
with release 10.3 or higher, enter ROOT15 as the
username.
with release 10.3 or higher, enter ROOT15 as the
username.
•
If there are only ONS 15454 NEs with releases before
10.3, enter CISCO15.
10.3, enter CISCO15.
•
If there are a mix of ONS 15454 NEs with releases 10.3
and previous version, you must first enter ROOT15 as
the user name and then configure the NE authentication
credentials for releases older than 10.3 as CISCO15
using the NE Authentication tab, see the "
and previous version, you must first enter ROOT15 as
the user name and then configure the NE authentication
credentials for releases older than 10.3 as CISCO15
using the NE Authentication tab, see the "
" section in the Prime Optical user
guide.
3.
(Optional) Configure automatic alarm acknowledgment
from the Control Panel.
from the Control Panel.
4.
Enable NE automatic backup from the Control Panel.
5.
Verify that the NE software version exists in the Supported
Devices Table.
Devices Table.
6.
Add NEs and build the network.
7.
(Only for WSE management) Create SecurityAdmin and
SecurityProvisioner profiles
SecurityProvisioner profiles
2
2.
User Profiles and Roles
in the user guide
for more information on the function of each security profile.