Cisco Cisco Prime Optical 9.5 Technical References
MTNM IMPLEMENTATION STATEMENT TEMPLATES AND GUIDELINES
2.33.3 Proprietary LayerRates
The EML vendor should publish a list of proprietary layerRates that are used along with their definition. When a
layerRate has been subsumed into the standard this list should be augmented with the equivalence and
obsolescence statement.
layerRate has been subsumed into the standard this list should be augmented with the equivalence and
obsolescence statement.
The proprietary layerRate should be used where:
• A transport technology within a product is as yet to be incorporated in the MTNM model
o This layerRate should be marked as “being standardized” in its definition in the conformance
statement
o When the transport technology is incorporated the vendor should identify the equivalence and
obsolescence in their conformance statement
• A proprietary transport technology has been used which is necessary to expose over the interface for
monitoring and/or configuration purposes
o This layerRate should be marked as “proprietary” in its definition in the conformance statement
Where a proprietary layerRate is used it may be necessary to name a TP (CTP or FTP) from that layerRate. In
this case a name-string similar in structure to that used for a standardize layerRate (in the layerRate list) should
be allocated by the vendor and recorded in the conformance statement. To conform to the specification this
name-string will start with “PROP” (e.g. “PROP_sts_291c”).
this case a name-string similar in structure to that used for a standardize layerRate (in the layerRate list) should
be allocated by the vendor and recorded in the conformance statement. To conform to the specification this
name-string will start with “PROP” (e.g. “PROP_sts_291c”).
style in document.
Layer Rate Number
(integer greater than
or equal to 10,000)
• Where an NE only provides partial information on the layerRate, e.g., the NE only indicates that the
layerRate is SONET or ATM
o This layerRate should be marked as “partial” in its definition and should (where possible) be
related to layerRates that it covers
Table Error! No text of specified
-81. Proprietary LayerRate Table
Layer Rate Name
(the names of all proprietary layer
rates start with “PROP”)
Status (either “Being Standardized”,
“Proprietary”, “Partial” or “Obsolete”
10,000 PROP_DSR_OC3072_and_STM1024
Being
Standardized
10,001 PROP_STS_291c
Proprietary
PROP_SONET
Partial
10,003 PROP_STS12c_and_VC4_4c
Obsolete
In v3.0, a layerRate equivalent to
PROP_STS12c_and_VC4_4c has been
defined, i.e., LR_STS12c_and_VC4_4c. So,
PROP_STS12c_and_VC4_4c will no longer be
used.
PROP_STS12c_and_VC4_4c has been
defined, i.e., LR_STS12c_and_VC4_4c. So,
PROP_STS12c_and_VC4_4c will no longer be
used.
10,002
TMF814Av3.1
TeleManagement Forum 2007
Page 81 of 115