Cisco Cisco Configuration Engine 1.4 Release Notes
3
78-16215-01
Console Access to CNSIE-2115-K9 System
Console Access to CNSIE-2115-K9 System
Normal terminal login to the CNSIE-2115-K9 (x335) system is supported by way of the system serial
port (See
port (See
, callout-7).
Timesaver
For immediate console access to the server, use two DB9 connectors and a rollover cable to connect your
laptop computer to the server serial port.
laptop computer to the server serial port.
Figure 1
CNSIE-2115-K9 (x335)Rear Panel
1.
Power connector: Connect the power cable here.
2.
Ethernet 2 connector: Connect an Ethernet cable here.
3.
USB 3 connector: Connect to a Universal Serial Bus here.
4.
Ethernet 1 connector: Connect an Ethernet cable here.
5.
ISM connector: Connect an ASM link cable from the ASM interconnect module to this connector.
6.
C2T OUT connector: Connect the cable from this connector to the input connector of another
server.
server.
7.
Serial connector: Connect a 9-pin serial device to this connector.
8.
C2T IN connector: Connect the cable from the output connector of another server to this connector.
9.
Power connector on Remote Service Adapter: Connect the power cable for Remote Service
Adapter here.
Adapter here.
10.
RS-485 on Remote Service Adapter: Connect the ASM Interconnect Module to this connector.
11.
Serial connector on Remote Service Adapter: Connect a 9-pin serial device to this connector.
12.
Ethernet connector on Remote Service Adapter: Connect an Ethernet cable here.
The CNS 2100 Series system redirects and supports console login at the serial port. It is a more desirable
feature because you can perform daily or emergency administrative tasks remotely, by way of the serial
port.
feature because you can perform daily or emergency administrative tasks remotely, by way of the serial
port.
Serial Connection Settings
The serial connection settings are as follows:
9600 baud
8 data bit
N (No)parity
1 stop bit
8 data bit
N (No)parity
1 stop bit
101489
3
2
8
9
10
11
12
7
4
5
6
1