Cisco Cisco Evolved Programmable Network Manager 2.0 Installation Guide
18
c.
Click Finish.
This process might take a few minutes to complete. Check the progress bar in the Deploying Virtual Application
window to monitor the task status. When the deployment task has successfully completed, a confirmation window
appears.
window to monitor the task status. When the deployment task has successfully completed, a confirmation window
appears.
Step 12
Click Close. The virtual appliance that you deployed is listed under the host, in the left pane of the VMware vSphere
client.
client.
What To Do Next
Proceed to
Install Cisco EPN Manager on the Server
Procedure
Step 1
If you did not specify that the virtual appliance should automatically start after deployment (in the previous procedure),
manually start the VM. In the VMware vSphere client, right-click the deployed virtual appliance, then choose Power >
Power On.
manually start the VM. In the VMware vSphere client, right-click the deployed virtual appliance, then choose Power >
Power On.
Step 2
Click the Console tab, and at the localhost login prompt, enter setup.
Step 3
Enter the following parameters as you are prompted for them:
Parameter
Description
Hostname
Host name of the virtual machine.
IP Address
IP address of the virtual machine.
IP default netmask
Default subnet mask for the virtual machine IP address.
IP default gateway
IP address of the default gateway.
Default DNS domain
Default DNS domain name.
Primary nameserver
IP address of the primary DNS server.
The console will prompt you to add a secondary nameserver. Enter:
•
Y to enter a secondary nameserver.
•
N to proceed to the next step of the installation.
Secondary nameserver
IP address of the secondary DNS server you want to use if the primary server cannot be reached.
Primary NTP server
IP address or host name of the primary Network Time Protocol server you want to use (the default
is time.nist.gov).
is time.nist.gov).
The console will prompt you to add a secondary NTP server. Enter:
•
Y to enter a secondary NTP server.
•
N to proceed to the next step of the installation.
Secondary NTP servers
IP address of the secondary NTP server you want to use if the primary NTP server cannot be
reached.
reached.
System Time Zone
The time zone you want to use.
For a list of supported time zones, see the time zone reference in the
.
Clock time
The clock time (based on the selected System Time Zone).
The console will prompt you to change the system clock time. Enter:
•
Y to change the clock time.
•
N to proceed to the next step of the installation.