Cisco Cisco Evolved Programmable Network Manager 2.0 Installation Guide

If you plan to use a remote repository (because Geo Map files are very large), make sure a remote repository has been 
configured. For more information, refer to the topics on using remote FTP backup repositories in the 

Make sure SCP is enabled on your client machine and the required ports are open (refer to the 

This procedure shows you how to download and copy the GeoMaps resources to the default local repository on the Cisco EPN 
Manager server.

Download the Geo Maps compressed files to a client machine.

Go to the 

Navigate to the files by choosing All Releases > 2.0 >2.0.1.

Identify the Geo Map you want to download and click Download.

Follow the instructions to save the file to the client machine. 

Copy the Geo Maps compressed files from the local machine to the Cisco EPN Manager server’s default local repository 
(/localdisk/defaultRepo).

Start an SSH session with the secondary server and log in as the Cisco EPN Manager CLI admin user.

Log in as the Linux CLI admin user (as described in 

). 

From the Cisco EPN Manager server, retrieve each file from the client machine and copy it to the server. (As the Linux 
CLI admin user, you can optionally use FTP or SFTP.)   The scp command uses the following syntax:

 clientUsername@clientIP:/fullpath-to-tarfile  /localdisk/defaultRepo

Where:

clientUsername is your username on the client machine

clientIP is the IP address of the client machine to which you downloaded the files in 

fullpath-to-tarfile is the full pathname of the Geo Maps compressed file on the client machine

For example:

scp joesmith@123.456.789.101:/temp/Russia_GeoMap_CEPNM_2_0_1-bundle.tar.gz 

/localdisk/defaultRepo

Install the Geo Maps as described in