Cisco Cisco Multicast Manager 3.3 Information Guide
8
Device Instrumentation Requirements for Cisco Multicast Manager, 3.3.2
OL-23601-03
CLI Support
Command Descriptions
provides a short description of each command that CMM uses.
MVPN Diagnostics VRF
Update
Update
Menu Location: Diagnostics >
Tools > MVPN
Tools > MVPN
Used to populate Provider Edge
(PE) Device Configurations with
Device Name URL.
(PE) Device Configurations with
Device Name URL.
Use: Updates MVPN information
when user clicks the device name
URL.
when user clicks the device name
URL.
Note
The commands used here
are also used to update
VRF information during
CMM discovery.
are also used to update
VRF information during
CMM discovery.
CLI commands for IOS:
•
sh ip multicast vrf <vrfName>
•
sh ip vrf interfaces <vrfName>
•
sh run vrf <vrfName>
CLI commands for IOS-XR:
•
sh run multicast-routing
•
sh vrf <vrfName> detail
Explicit User Tracking
Diagnostics
Diagnostics
Menu Location: Diagnostics >
Tools > Explicit User Tracking
Tools > Explicit User Tracking
Use: To see user information.
CLI commands:
•
sh ip igmp groups | include Vlan
•
sh ip igmp snooping explicit-tracking vlan <vlan_no>
P2MP Discovery
Menu Location: Discovery &
Trace > Discovery > Multicast
Discovery
Trace > Discovery > Multicast
Discovery
Click the Distributed Network
tab and select P2MP.
tab and select P2MP.
Use: To find the P2MP tunnel and
P2MP status in the devices.
P2MP status in the devices.
CLI command:
•
sh mpls traffic-eng tunnels
P2MP Trace
Menu Location: Discovery &
Trace > Trace > Multicast
Trace
Trace
Use: To find the forwarding
interfaces in the P2MP tunnel.
interfaces in the P2MP tunnel.
CLI commands:
•
sh mpls traffic-eng tunnels role all brief
•
sh mpls traffic-eng forwarding detail
•
sh mpls traffic-eng destination list
•
sh ip mroute <Source> <Group>
Table 5
CMM Functionality Requiring Telnet or SSH Access (continued)
Functionality
Location and Usage
CLI Commands
Table 6
CLI Commands Used by CMM—Command Descriptions
Command
Description
sh cam dyn
The show cam dynamic (sh cam dyn) command shows dynamic entries in the
Content Addressable Memory (CAM) table on Catalyst switches.
Content Addressable Memory (CAM) table on Catalyst switches.
sh ether sum
Displays Ethernet information for an interface.
sh fab swi
Display information about the crossbar fabric on an interface and shows the
module switching mode.
module switching mode.