Cisco Cisco Prime Network Analysis Module Software 5.1 Installation Guide
16
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 5.1
OL-24402-01
How to Install, Upgrade, or Downgrade NME-NAM-120S
Upgrading the NAM Application Image — Patch
This section describes how to add a patch to your NAM application image from the NAM CLI.
SUMMARY STEPS
1.
Access the NME-NAM-120S console by following the steps described in
.
Note
Depending on the previous state of the session, you might be prompted to log in to the NAM CLI.
2.
At the NME-NAM-120S prompt, enter one of:
patch ftp://user:passwd@host/full-path/filename
or
patch ftp://user@host/full-path/filename
patch ftp://user:passwd@host/full-path/filename
or
patch ftp://user@host/full-path/filename
3.
show patches
4.
Close the session as described in
.
DETAILED STEPS
Upgrading the NAM Helper Image (NAM CLI)
This section describes how to upgrade the NAM helper image stored on the NAM compact flash. The
NAM must be running its application image for these steps to work.
NAM must be running its application image for these steps to work.
Command or Action
Purpose
Step 1
Follow the steps described in
to close the NAM console
session.
Initiate a console connection in the NME-NAM-120S. Log
in to the NAM CLI.
in to the NAM CLI.
Step 2
patch
ftp://user:password@host/full-path/filename
or
patch
ftp://user@host/full-path/filename
Downloads and installs a software patch.
•
Use the first option, which includes the password, if the
FTP server does not allow anonymous users.
FTP server does not allow anonymous users.
•
If you use the second option, enter your password when
prompted.
prompted.
Step 3
show patches
Example:
root@nam1.company.com# show patches
Displays all installed patches.
Verify that your patch was successfully installed.
Step 4
Follow the steps described in
to close the NAM console
session.
Close the NAM console session.