Cisco PowerKEY CableCARD Module 802 Technical References
Chapter 2 M-Card-Related Diagnostic Screens
36
78-4015203-01 Rev D
Copy Protection Information - Page 1
Field
Names
Description
Possible Values
Auth Status The current status of the
M-Card/host authentication
(binding)
(binding)
CP Auth Received
—authorization
has been received from the
headend by the card/Host pair and
the authentication and binding are
complete
headend by the card/Host pair and
the authentication and binding are
complete
Waiting for CP Auth
—waiting for
CP authorization from the headend
Waiting for Host Cert
—waiting for
certificates from the host
CP Failure
—CP session failure or
authorization keys do not match;
all decryption is disabled
all decryption is disabled
Invalid Host Cert
—certificate is
invalid; binding has failed
Info not available
—unknown
state
LTSID
The local transport stream ID
assigned by the host
assigned by the host
0
– 0xFFFFFFFF
N/A
—M-Card module is
functioning in SMODE
PN
The program number running on
a specific stream that is identified
by the LTSID
a specific stream that is identified
by the LTSID
0
– 0xFFFFFFFF—valid program
number
0
—not used
CCI
The level of copy protection
passed from the card to the host
passed from the card to the host
0x00
—copying not restricted
0x01
—no further copying is
permitted
0x02
—one generation copy is
permitted
0x03
—copying is prohibited
ERR
The number of times a CCI
timeout has occurred for this
program
timeout has occurred for this
program
[Integer > 0]
MKS period The rate (seconds) that copy
protection keys are refreshed
[Integer > 0]
Default: 60 seconds
Default: 60 seconds
VerifyKey
Status
Status
Indicates whether the CP keys
were successfully verified
were successfully verified
Note: This field only appears
when the M-Card module is
running in an MMODE.
when the M-Card module is
running in an MMODE.
OK
Not OK