Cisco Flexible Solutions Taps Installation Guide
Removing the Faceplate
4013399 Rev C
21
To Remove a Faceplate with Feeder Cables Connected (Hot Install)
Follow these steps to remove a faceplate with feeder cables already connected to the
housing.
1 Remove all coax drop cables from the drop port F-connectors.
2 Using a 3/8-in. wrench, loosen all faceplate bolts.
3 If the housing is installed on a strand, go to step 4.
housing.
1 Remove all coax drop cables from the drop port F-connectors.
2 Using a 3/8-in. wrench, loosen all faceplate bolts.
3 If the housing is installed on a strand, go to step 4.
If the housing is installed on a pedestal, go to step 5.
WARNING:
Protect yourself from electric shock and your equipment from damage.
Certain components can deliver an electrical shock.
Protect yourself from electric shock and your equipment from damage.
Certain components can deliver an electrical shock.
4 Attach a grounding wire assembly to the strand wire and a drop port F-
connector.
Proceed to step 6.
5 Attach a grounding wire assembly to the strand clamp bolt on the pedestal and a
drop port F-connector.