Cisco Cisco Content Delivery Engine 220 Technical References
MegaRAID SAS Controller Replacement Procedure
OL-27138-01
All contents are Copyright © 2012 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
58
Figure D3: MegaRAID WebBIOS Configuration Options Menu
6.
Select “Clear Configuration” and select “Next”
Figure D4: MegaRAID WebBIOS Configuration Wizard Options
7.
Answer “Yes” to the “Destructive” message
8.
Once the clear completes, “Exit” the WebBIOS utility
9. Power off the system
10. The MegaRAID controller cached configuration will now be cleared just like a
10. The MegaRAID controller cached configuration will now be cleared just like a
new controller
11. Open the system and attach the SAS cable to the MegaRAID controller card
12. Boot the server, and follow the procedure for Foreign Configuration Import if
12. Boot the server, and follow the procedure for Foreign Configuration Import if
prompted
13. Use Ctrl-H command to enter WebBIOS configuration when prompted at The
MegaRAID BIOS prompt