Cisco Headend System Release 2.5
738185 Rev B
DNCS Configuration for Distributed BFS
2-5
Establishing the Connectivity Parameters for the MPEG Source
The second step in adding a device to your DNCS is to establish the connectivity
from the MPEG source to the BFS QAMs.
1.
Click the Connectivity tab in the Setup MPEG Source window. The
Connectivity tab appears in the forefront with an illustration of any devices
already connected to this MPEG source. If no devices are connected, the
illustration area is empty.
2.
Click Create Port. The Port Number Prompt window opens.
3.
In the Port Number box, type 1. This number identifies the output port for the
MPEG source.
Continued on next page