Cisco Cisco Digital Service Access Node (DSAN) 8210 Installation Guide
Chapter 3 Hardware Installation
42
78-4041038-01 Rev B
Opening and Closing the Housing
To Open the Housing
Complete the following steps to open the node housing.
Important: Before unscrewing the housing bolts, make sure the removable locking
screw in the hinge is in place and secure. The locking screw prevents separation of
the lid from the base.
1 Unscrew the 8 half-inch housing closure bolts on the housing lid until they are
screw in the hinge is in place and secure. The locking screw prevents separation of
the lid from the base.
1 Unscrew the 8 half-inch housing closure bolts on the housing lid until they are
loose.
2 Open the housing.
Note: The closure bolts will remain attached to the housing.