Cisco Cisco Digital Service Access Node (DSAN) 8210 Installation Guide
Administration Group
OL-30954-01
121
Administration Group
Use the elements in the Administration group to perform a variety of DSAN
administrative tasks involving hardware, software configuration, and
communication with the network management system.
administrative tasks involving hardware, software configuration, and
communication with the network management system.
saDsanAdminReset
The reset value will trigger a reset. The reconfiguration will trigger an application
state machine reset, which will reconfigure DSAN by getting a new configuration
file.
state machine reset, which will reconfigure DSAN by getting a new configuration
file.
The following values can be used for a write operation:
1 (normal) - The value returned for a "get" performed on this OID.
2 (eHostReset) - The eHost entity will be reset. This will consist of a
reconfiguration of the eHost, but not a reset of the eCM.
reconfiguration of the eHost, but not a reset of the eCM.
3 (sysreset) - The eCM and eHost will be completely reset.
Access: Read-write
Syntax: Integer
OID: 1.3.6.1.4.1.1429.1.10.2.1.2.1
saDsanAdminSession
The value normal (1) will be reported by default. The values killLocalSessions (2)
and killRemoteSessions (3) will terminate all such sessions.
and killRemoteSessions (3) will terminate all such sessions.
Access: Read-write
Syntax: Integer
OID: 1.3.6.1.4.1.1429.1.10.2.1.2.2
saDsanAdminConfigFileOnBoot
The possible values for this object are useStoredMap (1) and waitForMap (2). This
configuration will be used during the boot-up stage. The default is useStoredMap.
configuration will be used during the boot-up stage. The default is useStoredMap.
Access: Read-write
Syntax: Integer
OID: 1.3.6.1.4.1.1429.1.10.2.1.2.4
saDsanAdminEmmAlarmNumberOfDays
This object defines the number of days that elapse before the DSAN sends a trap
warning that an entitlement management message (EMM) is due.
warning that an entitlement management message (EMM) is due.