Cisco Cisco Digital Service Access Node (DSAN) 8210 Installation Guide
Chapter 5 SNMP Management
122
OL-30954-01
EMMs authorize specific cable services for a particular DSAN. On a cyclical basis
(every 10 days, for example), new EMMs are sent from the headend to DSAN. If the
cycle lapses without receiving an EMM, the customer should receive a trap warning
that it has been a full cycle since the last EMM was processed. This object allows the
customer to set the duration of the cycle in days that triggers an EMM alarm trap.
The range of possible values is 1 to 60; the default value is 10.
(every 10 days, for example), new EMMs are sent from the headend to DSAN. If the
cycle lapses without receiving an EMM, the customer should receive a trap warning
that it has been a full cycle since the last EMM was processed. This object allows the
customer to set the duration of the cycle in days that triggers an EMM alarm trap.
The range of possible values is 1 to 60; the default value is 10.
Access: Read-write
Syntax: Integer
OID: 1.3.6.1.4.1.1429.1.10.2.1.2.9
Event Log
The event log contains information about devices on the host. Use the elements
described in this section to specify the IP address, path, and name of the event log
file and to upload, clear, or query the status of the event log.
described in this section to specify the IP address, path, and name of the event log
file and to upload, clear, or query the status of the event log.
saDsanEventLogIpAddress
This object specifies the IP address of the destination machine to which you will
upload the event log. The address format is xxx.xxx.xxx.xxx, where the value of each
element (xxx) in the address ranges from 0 to 255.
upload the event log. The address format is xxx.xxx.xxx.xxx, where the value of each
element (xxx) in the address ranges from 0 to 255.
Access: Read-write
Syntax: IpAddress
OID: 1.3.6.1.4.1.1429.1.10.2.1.2.6.1
saDsanEventLogPath
This object defines the path to the event log file within the file structure of the device
specified by the event log IP address. The event log path string can be up to 127
characters in length. By default, an empty string implies a path of /var/tftpboot.
specified by the event log IP address. The event log path string can be up to 127
characters in length. By default, an empty string implies a path of /var/tftpboot.
Access: Read-write
Syntax: DisplayString
OID: 1.3.6.1.4.1.1429.1.10.2.1.2.6.2
saDsanEventLogFilename
This object identifies the name of the event log file. The event log file name can be up
to 63 characters in length, and must conform to standard naming conventions for the
operating system of the TFTP server.
to 63 characters in length, and must conform to standard naming conventions for the
operating system of the TFTP server.
Access: Read-write
Syntax: DisplayString
OID: 1.3.6.1.4.1.1429.1.10.2.1.2.6.3