Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Installation Guide
EDR Digital Return Multiplexing Applications
To Install the Transmitter Module
The EDR transmitter module uses the same style housing as the optical receivers and
transmitters.
If your EDR transmitter comes without OPM module installed, you need to order
If your EDR transmitter comes without OPM module installed, you need to order
the fiber jumper and the OPM module from our sales representatives, and perform
the following steps to install the OPM module and connect the fiber jumper to the
installed OPM module before installing the EDR transmitter.
To Install the OPM Module in the EDR Transmitter
To Install the OPM Module in the EDR Transmitter
CAUTION:
Removing and installing an OPM module can shorten its useful life. Do not remove
and insert OPM modules more often than is absolutely necessary.
CAUTION:
The OPM modules are electro-static sensitive devices. Always use an ESD wrist
strap or similar individual grounding device when handling OPM modules or
coming in contact with modules.
1 Close the bale-clasp before inserting the OPM module.
2 Line up the OPM module with the port, and slide it into the port.
3 Connect the LC/PC fiber jumper to the OPM.
3 Connect the LC/PC fiber jumper to the OPM.
134
OL-30326-02