Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Installation Guide
EDR Digital Return Multiplexing Applications
The following illustration shows the location of the installed modules in the node.
For EDR 1:1 Transmitter Module:
For EDR 1:1 Transmitter Module:
To Route the Fiber Jumper
The fiber jumper must be routed carefully. The Green LC connector must be
The fiber jumper must be routed carefully. The Green LC connector must be
connected to the proper fiber adapter, damage may be caused if the fiber jumper
pigtail extends beyond the black fiber tray.
Fiber Jumper Routing for 1:1 transmitter module:
Fiber Jumper Routing for 1:1 transmitter module:
Note: When removing faulty OPM module, press and remove the blue LC connecter
before you can open the bale clasp.
To Connect the Long-haul Fiber
1. Insert the fiber-optic start-head to the optical adapter.
2. Route fiber on the fiber tray of GainMaker Node.
3. Connect the fiber-optic end-head to the receive bore of the OPM module
1. Insert the fiber-optic start-head to the optical adapter.
2. Route fiber on the fiber tray of GainMaker Node.
3. Connect the fiber-optic end-head to the receive bore of the OPM module
installed on the Receiver of the Prisma II platform.
136
OL-30326-02