Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Installation Guide
Troubleshooting
Symptom
Possible Cause
Possible Solutions
No optical signal output
(cont'd)
One or more power supply
voltages are out of
specification.
Check the power supply for
proper operation.
No AC at receptacle.
Check the receptacle for AC
power.
Blown fuse on the power
supply.
Check the power supply
fuse and replace as
necessary.
Faulty module.
Contact the Technical
Service Center for
assistance.
108
OL-29644-03