Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Installation Guide
Chapter 3 Balancing and Setup
Forward Path Balancing for AGC Stations Using
Manual Setup Mode
To Set the Manual Backoff Level
You must adjust the manual backoff level.
Complete the following steps to set the manual backoff level.
1 Connect an RF meter or spectrum analyzer to the forward main output test
Complete the following steps to set the manual backoff level.
1 Connect an RF meter or spectrum analyzer to the forward main output test
point.
2 Set switch S1 to position number 2.
54
OL-30035-03