Cisco Model D-PCG1000 PowerKEY CAS Gateway
Adjust How DHCTs Use IPG Memory
4038960 Rev A
93
Sending IPG Memory Usage Settings to All DHCTs in Your Network
Once you have completed testing the Memory Usage settings on the DHCTs in your
headend, follow these instructions to send these settings globally to all DHCTs in
your network that do not receive hub-specific settings. After these settings are
applied globally, you will be able to change any hub-specific settings to those of the
global settings if you wish.
1 On the DNCS Administrative Console, select the Server Applications tab.
2 Click DHCT Config. The DHCT Configure window opens.
3 Select Global. The Set Up Global DHCT Configuration window opens.
4 Click the IPG tab. The IPG tab moves to the forefront and displays the default
1 On the DNCS Administrative Console, select the Server Applications tab.
2 Click DHCT Config. The DHCT Configure window opens.
3 Select Global. The Set Up Global DHCT Configuration window opens.
4 Click the IPG tab. The IPG tab moves to the forefront and displays the default
Memory Usage settings.
5 Enter the settings appropriate to your network.
Note: For an explanation of Memory Usage settings, see IPG Memory Usage
Settings.
6 When finished, click Save. The Application Server sends these settings to all
DHCTs in your network that do not receive hub-specific settings. Changes
should be made within a few minutes.
Note: These changes do not affect DHCTs that receive hub-specific
Note: These changes do not affect DHCTs that receive hub-specific
configurations.