Cisco Model D-PCG1000 PowerKEY CAS Gateway
Chapter 6 Setting Up the Interactive Program Guide
94
4038960 Rev A
Changing a Hub-Specific Configuration to a Global Configuration
Once you have completed testing the Memory Usage settings on the DHCTs in your
headend, follow these instructions to send these settings globally to all DHCTs in
your network that do not receive hub-specific settings. After these settings are
applied globally, you will be able to change any hub-specific settings to those of the
global settings if you wish.
1 On the DNCS Administrative Console, select the Server Applications tab.
2 Click DHCT Config. The DHCT Configure Prompt window opens.
3 Click Hub. The DHCT Configure Prompt window displays all of the hubs in
1 On the DNCS Administrative Console, select the Server Applications tab.
2 Click DHCT Config. The DHCT Configure Prompt window opens.
3 Click Hub. The DHCT Configure Prompt window displays all of the hubs in
your network along with their IDs and configurations.
4 Select the hub that you need to change from Hub-Specific to Global
configuration.
5 Click the File menu and select Delete Hub-Specific. A message asks if you are
sure you want to delete the hub-specific configuration.
6 Click Yes to delete the hub-specific configuration.