Cisco Model D-PCG1000 PowerKEY CAS Gateway
10
78-4043063-01 Rev B
Making the QAM Modulator BFS Capable
Making the QAM Modulator BFS Capable
Note: Only follow these instructions if you are modifying an existing QAM
modulator for GigE BFS. If you are setting up a new QAM modulator for the GigE
BFS, go to Setting Up a New BFS QAM Modulator (on page 5).
1
modulator for GigE BFS. If you are setting up a new QAM modulator for the GigE
BFS, go to Setting Up a New BFS QAM Modulator (on page 5).
1
On the DNCS Administrative Console, click the Network Element Provisioning
tab.
2 Click QAM. The QAM list opens.
3
3
In the Filter area, click By Field and select QAM Type.
4 Click By Value and select GQAM.
5 Click Show.
6
5 Click Show.
6
Select the QAM modulator you want to make BFS capable and click Edit. The
Edit QAM window opens with the Parameters tab in the forefront.
7 Scroll down to the Advanced Parameters section of the screen.
8 Select the BFS Capable option (so that a check appears in the box).
9 Click Save.
10 Are you using our RNCS solution?
8 Select the BFS Capable option (so that a check appears in the box).
9 Click Save.
10 Are you using our RNCS solution?
If yes, repeat this procedure for each RNCS you are converting from ASI to
GigE BFS.
GigE BFS.
If no, go to the next step.
11 Go to Stopping the In-Band Carousels (on page 11).