Cisco Headend System Release 2.5 User Guide
3-12
Backing Up and Restoring the Informix Database
4001155 Rev B
Restore the Informix Database,
Continued
13. When the message Successfully restored the database appears, remove the
tape and store it in a safe place.
14. Type eject cdrom and then press Enter.
15. Remove the CD and store it in a safe place.
16. Follow the procedures in Appendix B, Restarting System Components, to
15. Remove the CD and store it in a safe place.
16. Follow the procedures in Appendix B, Restarting System Components, to
restart Spectrum, the DNCS, and the Application Server.
Restoring the Informix Database Using More Than One Backup Tape
Follow these instructions to restore the Informix database using more than one
backup tape.
Note: You need the tapes from your most recent database backup in order to restore
Note: You need the tapes from your most recent database backup in order to restore
the Informix database.
Important: Be sure your tapes are write-protected before you use them to restore the
Important: Be sure your tapes are write-protected before you use them to restore the
database.
1. If necessary, follow the procedures in Appendix A, Stopping the System
Components, to stop Spectrum, the Application Server, and the DNCS.
2. If necessary, open an xterm window on the DNCS.
3. Type su - and then press Enter to log in as root user.
3. Type su - and then press Enter to log in as root user.
Note: Be sure to type the single dash after typing su.
Result: The password prompt appears.
Result: The password prompt appears.
4. Type the root password and then press Enter.