Cisco Headend System Release 2.5 Installation Guide
78-738190-01 Rev B
SR 2.5 and SR 3.5 Post Upgrade Procedures
5-43
Change the DNCS Data Pump Rates,
Continued
8.
Click Save.
Results:
•
Results:
•
The Set Up BFS Source window closes.
•
The DNCS saves the new settings.
•
The BFS automatically repopulates the data carousel. During this period,
the carousel may be down for a period of up to two minutes.
Note: The staging process could be affected when you change data rates. The
download interruption is brief, as the session restarts in a few minutes.
9.
Repeat steps 5 through 8 for the remaining sources on the Site <DNCS> BFS
Administration window.
10. After examining and changing (if necessary) the carousel data for each source
on the DNCS site, go back to step 3 and repeat this procedure for each of the
remote sites supported by the system.
11. After you have changed all the data carousel rates, click File and then select
Close on the Site <Site Name> BFS Administration window.